Horse Tack List with Descriptions

Saddles:
Saddles are seats for the rider, fastened to the horse's back by means of a girth or cinch, a wide strap that goes around the horse at a point about four inches behind the forelegs. Some saddles will also have a second strap known as a flank cinch that fastens at the rear of the saddle and goes around the widest part of the horse's belly.

It is important that the saddle is comfortable for both the rider and the horse—an improperly fitting saddle may rub and cause the horse pain and can lead to the horse, rider, or both getting injured.

There are many types of saddles, each specially designed for its given task. Saddles are usually divided into two major categories, "English saddles" and "Western Saddles" according to riding discipline they are used in. Other types of saddles, such as racing saddles, Australian saddles, and endurance saddles do not fit in either category.

A new class of saddles have no tree inside (treeless saddles); they are mainly used for pleasure and trail riding and endurance.

Here is a list of Horse Saddles available today:
English Saddles
Jumping Saddle
Dressage Saddle
Polo Saddle
Park Saddle
Racing Saddle
Show Saddle (gaited)
A/P or All Purpose (G/P General Purpose)
Western Saddle
Roping Saddle
Barrel Racing Saddle
Endurance Saddle
Trail Saddle
Pleasure Saddle
Sidesaddle
English Sidesaddle
Western Sidesaddle
Military Saddle
Australian stock saddle
Treeless saddle

Stirrups:
Stirrups are supports for the rider's feet that hang down on either side of the saddle. The invention of stirrups was of great significance in mounted combat, giving the rider a secure footing while on horseback. At the same time the stirrups are problematic due to the tendency for feet to get stuck in them in dire moments, causing the rider to be dragged. Because of this danger saddlers have developed both safety stirrups or peacock stirrups —which are either shaped to allow the rider's foot to slip out easily or are closed with a rubber band—and safety stirrup bars that are hangers for the stirrup leather that allow it to detach from the saddle in an emergency.

Bridles and halters:
Bridles and halters are an arrangement of straps around the horse's head used for communicating with the animal. Bridles contain a bit attached to reins and are used for riding and driving horses. On the other hand, halters have no bit, are more general-purpose, and most often equipped for leading (particularly pack horses) or tethering a horse with a lead rope. A hackamore is a type of bitless bridle usually used to train young horses, or to go easy on an older horses mouth. Hackamores or Bosal's are usually seen in western riding.

Raised bridles have a raised noseband and are seen in English riding, as western bridles rarely have nosebands.

Double bridles use two bits in the mouth at once. The two bits allow the rider to have very precise control of the horse; usually only very advanced horses and riders use double bridles. Double bridles are usually seen in the top levels of dressage, as well as for showing purposes.

A lungeing cavesson is a special type of halter used for lungeing a horse. Lungeing is causing a horse to walk, trot and/or canter in a large circle around the handler. It is used for training and exercise.

Reins:
Reins consist of leather straps or rope attached to the outer ends of a bit and extend to the rider's or driver's hands. Reins are the means by which a horse rider or driver communicates directional commands to the horse's head. Pulling on the reins can be used to steer or stop the horse. The sides of a horse's mouth are sensitive, so pulling on the reins pulls the bit, which then pulls the horse's head from side to side, which is how the horse is controlled.

On some types of harnesses there might be supporting rings to carry the reins over the horse's back. When pairs of horses are used in drawing a wagon or coach it is usual for the outer side of each pair to be connected to reins and the inside of the bits connected by a short bridging strap or rope. The driver carries "four-in-hand" or "six-in-hand" being the number of reins connecting to the pairs of horses.

A rein may be attached to a halter to lead or guide the horse in a circle for training purposes or to lead a packhorse.

Bits:
A bit is piece of metal that is placed in the horse's mouth, although on occasion the bit may be made of other materials. Despite popular opinion, the bit does not rest on the teeth of the horse. The bit hangs in a space behind the front "cutting" teeth and in front of the back "grinding" teeth. This space is known as the "bar". When a horse is said to "grab the bit in its teeth" they actually mean that the horse hardens its lips and mouth against the bit to ignore the rider's commands. Bits offer varying degrees of control and communication between rider and horse depending upon their design and on the skill of the rider. It is important that the style of bit is appropriate to the horse's needs and is fitted properly for it to function properly and be as comfortable as possible for the horse.

The types of bits are too numerous to list, but here are some examples:
Curb bit
Snaffle bit
Gag bit
Pelham bit
Kimberwicke bit

Bits come in several different mouthpieces and (for snaffles) rings. Some of these include:

Mouthpieces:
Single jointed
Mullen mouth (straight bar)
Dr. Bristol
French mouth
Corkscrew
Single and double twisted wire
Waterford

Rings:
Loose ring
D-ring
Eggbutt
Full-cheek
Baucher
Half-cheek

Bits are designed to work by pressure, not pain. Of course, in the wrong hands even the mildest bit can hurt the horse. Commands should be given with only the slightest movements of the hands. Instead of wrenching the horse's head in one direction by force, you should indicate the desired direction by tightening and loosening the grip on the reins. In fact, the majority of steering, especially in English riding is done with the legs and seat. The calf of the leg is used to push the body of the horse in a certain direction while the other one is used as a pivot and to provide the correct amount of impulsion required to keep the horse moving. Change of position of the seatbones and hip, and the pressure of the seatbone, are also extremely useful in not only turning, but speeding up and slowing down.

Harness:

A harness is a complicated set of devices and straps that attaches a horse to a cart, a sledge or any other load. There are as many kinds of harnesses as there are vehicles and loads to attach to a horse.

A horse that is used solely for draughting will have a bridle, reins, collar and hames, and traces. A horse that is supporting shafts, such as on carts, will also have a saddle to support the shafts and a britchen to brake the forward motion of the vehicle, especially when stopping or moving downhill. Horses guiding vehicles by means of a pole, such as a wagon, a hay-mower, or a dray, will have at least pole-straps attached to the lower part of their collar.

Martingales and breastplates:
A martingale is a strap that (1) keeps the horse from raising its head above a point of control or (2) keeps the horse from tossing its head and smacking its rider in the face.

Martingale types include:
Running martingale: There are 2 types: 1 has a yoke around the neck, a part that runs between the front legs and attaches to the girth of a saddle, and a fork at the chest that branches off and attaches to each rein, so that the bit presses on the bars of the mouth if the horse raises the head too high. 2 has a "yoke" around the neck, attaches to the girth, and either has a ring on each side of the yoke or a "fork" with a ring at each end, where the reins run through the rings, enabling the rider to more easily keep the horse flexed at the poll. Fitted correctly, this 2nd type of running martingale does not control how high the horse carries his head.
Standing martingale: similar to the running martingale, but instead of a fork it has one strap that runs from the chest and attaches to the noseband of the bridle, and therefore has no affect on the bit in the horse's mouth.

A western counterpart to this piece of equipment is the tie down. The standing martingale, however, does not provide as much freedom for the horse, which could be dangerous for cross-country riding. Therefore, when a horse is used for eventing it must use a running martingale for safety reasons, if a martingale is to be used at all.

Irish martingale: Unlike the previous two martingales, this does not control the height of the horse's head, but merely keeps the reins from going over the horse's head in the result of a fall. It consists of a piece of leather with a ring on each end in which each rein runs through.

Breastplates, breastcollars, and breastgirths are all extra equipment used to keep the saddle from sliding back. They are usually seen in demanding, fast-paced sports like eventing, show jumping, and polo, as well as fox hunting. They are also seen in Western events, with a more decorative than utilitarian function.

Introduction To Horseback Riding. Cool Book Prepares You To Safely Ride A Horse In Style, Before You Ever Approach A Horse! Click Here!